BELSIL® DM 1 PLUS

DIMETHICONE

Product description

BELSIL® DM 1 PLUS is a colorless, clear fluid of low viscosity and high volatility. It is non-polar and insoluble in water but miscible with mineral oils, lower alcohols, esters, and other solvents frequently utilized in cosmetics.

Due to its low heat of vaporization, BELSIL® DM 1 PLUS evaporates from the skin without producing a cooling or stinging effect.

APPLICATION

BELSIL® DM 1 PLUS can be utilized as a delivery system in antiperspirant and deodorant formulations as well as hair-care products and color-cosmetic compositions.

It helps to uniformly spread actives and pigments over the surface of hair and skin. It provides sufficient play time in color-cosmetics applications, thereby improving rub-in properties, reducing stickiness, and imparting lubricity and a smooth skin feel.

In hair-care products BELSIL® DM 1 PLUS supports easy spreading of high-viscosity fluids, improves wet combability, and functions as a resin plasticizer in fixative styling products.

To adjust drying times for specific product requirements, BELSIL® DM 1 PLUS may be blended in all proportions with other dimethicones and cyclomethicones.

Contact us now icons

Additional Information

Contact us now for more information, pricing, or a sample.

Download: BELSIL DM 1 PLUS (PDF, 159 KB)

Go back to full list

Storage

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Safety notes

Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from WACKER subsidiaries or may be printed via WACKER web site http://www.wacker.com.

Product Data

Typical General CharacteristicsInspection MethodValue
Appearance colorless, clear
Viscosity, dynamic at 25 °CDIN 530191,425 mPa.s
Density at 25 °CDIN 517570,828 g/cm³
Refractive index at 25 °C 1,384
Surface tension at 20 °C approx. 0,017 N/m
Flash pointDIN 5175532 °C
Boiling point / Boiling range at 1013 hPa > 100 °C
Ignition temperature (liquids)DIN 51794approx. 350 °C
INCI name Dimethicone

These figures are only intended as a guide and should not be used in preparing specifications.

Additional Information

Solubility

IngredientBELSIL DM 1 PLUSIngredientBELSIL DM 1 PLUS
Mineral oils Triglycerides 
C9-13 isoparaffins-Caster oil-
Mineral oil (high-visc.)XOlive oilsX
Mineral oil (low-visc.)XWheatgerm oilX
  Lanolin oil-
Esters/Ester oils   
Ethyl acetateXAlcohols 
C12-15 aalkyl benzoatesXOctyldodecanolX
Isopropyl myristateXOleyl alcoholX
Decyl oleateXPropylene glycolX
Oleyl oleateXIsopropanolX
Octyl methoxycinnamateXEthanolX
Octyl SalicylateXGlycerinX
  PPG-5-Laureth-5p
Ketones   
Benzophenone-3pEmulsifiers 
4-Methylbenzylide camphor-PEG-75 ianolin oil-
  PEG-7 glyceryl cocoate-
Water-  

X = soluble (>10%) p = partially soluble (1-10%) - = insoluble

STAY CONNECTED

Sign up for the latest information on our Personal Care & Cosmetics ingredient solutions. Choose to receive communications on Brenntag industry updates, supplier and product information, and trade shows and events.

Sign Up Now

This document is for informational purposes only. You accept sole responsibility for reading and complying with the Safety Data Sheets (SDS’s), as well as any other safety information, relating to the products listed herein. The information contained herein is based on Brenntag’s knowledge at the time of publication or release and not on any publications, independent studies, empirical evidence or other form of verification. You should not use or rely on any statements contained herein as a basis for any representations or warranties to your customers or end users as to the safety, efficacy or suitability of any product or for purposes of ensuring your compliance with any laws or regulations. Brenntag makes no warranties, express or implied, as to the accuracy, completeness, or adequacy of the information contained herein or as to fitness of any product for any particular purpose. Nothing contained herein shall be construed as an authorization to use or an inducement to practice any patent, trade secret or other intellectual property right. Before producing and distributing any product, it is your sole responsibility to adequately test and document the performance of the product and acquire any required intellectual property rights. You assume all risks for failing to do so and Brenntag shall not be liable (regardless of fault) to you, your employees, customers or end users or any third party for direct, special or consequential damages arising out of or in connection with the furnishing or use of this information. Please contact your local Brenntag representative if you have any questions about this information.