Vinyl Flooring Chemicals
Vinyl is one of the most popular flooring options for today's homeowners, especially in kitchens and bathrooms, due to its durability, comfort to walk on, and resilience to water, heavy foot traffic. Vinyl flooring is easily modified and comes in a wide variety of colors and patterns and can be made to look like wood, ceramic tile, and other materials. Vinyl flooring is economical compared to many other flooring options.
Vinyl has the potential to fade if exposed to direct sunlight and can become damaged under extreme temperatures. This typically limits vinyl flooring materials to indoor use. Sharp objects or heavy loads can also damage vinyl floors. Homeowners can choose between several types of vinyl flooring, namely sheet, tile, and plank. Sheets come in rolls, as carpet does, typically six or 12 feet wide. These sheets can be cut to size. Vinyl flooring types depend on the level of modification to the PVC backbone with plasticizers.
Vinyl tiles typically come in 9-inch or 12-inch squares and can look like ceramic, stone or marble when installed. They are easy to install and may use a peel-and-stick application method. The adhesives used are typically based on vinyl as well to maximize adhesion and maintain the durability and physical properties of the vinyl flooring product. Vinyl planks come in rectangular pieces and look similar to hardwood. They come in various sizes and thicknesses and use one of a range of installation methods. No matter which variety, vinyl flooring is made up of various raw materials and chemicals. All vinyl flooring has certain elements in common, but depending on the desired qualities, the composition of various pieces may vary. The manufacturing methods used may differ as well.
In this article you will learn:
CHEMICALS AND RAW MATERIALS IN VINYL FLOORING
Below are some of the primary materials and chemicals in vinyl flooring. Some of them are integral to the composition of vinyl, while others may differ between specific types of flooring. The compositions of floorings vary, and some of the mixtures are proprietary.
Polyvinyl chloride resins, also sometimes just called vinyl resins, are the primary ingredient in vinyl flooring. Polyvinyl chloride, or PVC, is a thermoplastic resin made of 5 7 percent chloride and 43 percent carbon, and is manufactured via a polymerization process of Vinyl Chloride Monomer (VCM). The VCM is derived from industrial grade salt (chloride source), and the vinyl mainly comes from ethylene, a petroleum or natural gas product. PVC is less dependent on petroleum than many other polymers. As a thermoplastic resin, PVC becomes pliable at high temperatures and solidifies once cooled.
PVC may be supplied in the form of a powder that is resistant to degradation and oxidation, allowing for long-term storage. PVC has inherent block resistance, and typically does not require flow aids when processed further. Before using PVC as resins for flooring or other products, processers mix in various additives (plasticizers, lubricants, heat stabilizers) to enhance or alter specific properties. After additives are mixed in, the result is a vinyl compound, often in the form of pellets.
In flooring, there may be several layers of PVC compounds. Typically, there is a core layer, a decorative layer and then a clear, durable wear layer on top that protects the other layers.
Without the addition of plasticizers, PVC is a rigid, brittle material. Rigid PVC is used to make piping and building elements such as siding. Adding plasticizers to PVC makes it flexible, enabling its use in flooring as well as other applications such as insulation for electrical cables, wire rope, and clothing. In addition to flexibility, plasticizers can improve the durability, temperature resistance, and weather resistance of PVC.
Plasticizers are ester compounds produced via reaction of an alcohol and an acid. Using different combinations of alcohols and acids creates different kinds of ester plasticizers, of which there are many. Most plasticizers used for vinyl flooring are phthalates, derivatives of phthalic acid. Phthalates are colorless, odorless ester liquids, and compatibilize well with PVC. Phthalates are non-volatile, and do not readily evaporate from PVC. Types of phthalates include diisodecyl phthalate (DIDP), diisononyl phthalate (DINP), and di-2-ethylhexyl phthalate (DEHP or DOP). These three plasticizers make up approximately 75 percent of what is used for PVC.
Other kinds of plasticizers that may be used include adipates, which are ideal for low-temperature resistance, and trimellitates, which are impart heat resistance. Benzoates are high solvating plasticizers for PVC, available as either monobenzoates or dibenzoates. Dibenzoates are environmentally friendly plasticizers. They are mainly used in PVC plastisol applications including flooring and film, but also in adhesives and sealants.
Pigments are another type of additive used in making vinyl flooring. Pigments give flooring its color and enable manufacturers to make flooring in a variety of designs, including those that mimic other materials such as wood or marble.
Pigments differ from dyes. Pigments are typically insoluble and come in the form of a powder, while dyes generally are liquids or soluble substances suspended in liquids.
There is a massive variety of pigments for flooring available that may be made from a myriad of natural materials or petrochemical derivatives. The right pigment depends on the desired colors as well as other factors such as availability and cost. Like plasticizers, the chosen pigments are mixed with the vinyl resin.
Vinyl flooring may also contain small amounts of stabilizers, which help to increase durability and reduce fading due to exposure to heat and sunlight. These stabilizers are mixed directly and thoroughly into the vinyl compound.
Vinyl stabilizers are typically metal compounds and may consist of a variety of substances derived from heavy metals. The primary heat stabilizers in a vinyl product may also be combined with other stabilizers made of organic materials such as epoxidized esters and polyols. Different stabilizer mixtures provide different qualities. Proper stabilization depends on their performance requirements, cost, and regulatory status.
Lead was once the leading stabilizer used, but due to health concerns, it is being phased out in some areas. Other substances that may be used include cadmium, calcium zinc, barium zinc, and tin.
Installing vinyl flooring often involves the use of adhesives. Flooring may come with adhesive already applied, or the installer may need to purchase an adhesive separately.
There is a wide range of adhesives that you can use to install flooring. Adhesives for flooring are often made of resins and may be pressure-sensitive. The best adhesive depends on various factors including the type of sub-floor, the layer of flooring that will be underneath the vinyl. The adhesive must be alkaline resistance and non-staining, fast drying allowing for easier traffic and less slippage.
Depending on the desired aesthetics, a coating of polyurethane may be applied over vinyl flooring composite. This coating provides a glossy finish, abrasion resistance and durability, and some UV stability. This finish typically lasts for many years, but if it becomes dull, the homeowner might apply a new coat of vinyl floor finish.
Polyurethane coating is a type of durable organic coating. It is a polymer in liquid form and may be either oil-based or water-based.
Polyurethane is also used in a variety of other products including footwear, automobile seats, and pillows in many different forms including hard plastic and foam.
Vinyl flooring may also contain various types of fillers, which can add texture, durability, and color as well as decrease costs. The vinyl core of a piece of flooring may be attached to a felt backing made of substances such as paper, wood pulp, clay, and calcium carbonate, which is a compound that appears naturally in the form of chalk, limestone, or marble and, in its pure form, contributes to various industrial processes.
Considerations When Choosing Chemicals and Raw Materials
Numerous factors impact which chemicals and raw materials are best to use for a vinyl flooring product. Most flooring companies perfect their ingredients list and processes over several years. Working with a knowledgeable chemical distributor can help you choose the materials that are right for your needs.
- Desired qualities: Different materials produce vinyl with different characteristics.
Consider the flexibility, durability, color, design elements, flame retardancy, and more.
Plasticizers, stabilizers, pigments, coatings, and fillers can all impact these qualities.
- Intended use: The conditions the flooring is used in may require the use of different
materials. While you may not always have this information beforehand, consider offering
flooring suitable for a variety of conditions. Different types of adhesives, for example, work
better on different types of sub-flooring.
- Safety and health impacts: The health and safety of both the people manufacturing the
flooring and the end user should always be a top concern. While many substances
deemed to have negative impacts are no longer in use, it is worthwhile to keep these
considerations in mind.
- Environmental impact: Many of the phased-out substances that have had a negative
health impact, and had a negative environmental impact, have been primarily replaced
with equally effective, environmental-safe alternatives. For instance, some materials that
produced higher levels of volatile organic compounds (VOCs) over time, have been
- Laws and regulations: Laws and regulations prevent manufacturers from using some
chemicals that may have potential harmful health, safety, and environmental impacts.
Laws may also limit material usage in other, less expected ways. Pay close attention to
legal issues when choosing materials.
- Cost: The cost of materials is another important consideration. Vinyl is known for being
an affordable flooring option.
HOW VINYL FLOORING IS MANUFACTURED
There are numerous processes used to manufacture vinyl flooring and depends on the type of flooring being produced. Considerations include whether it is in sheet or tile form, what properties it will have and what colors and designs it will have.
Below is a basic overview of some common vinyl flooring manufacturing processes.
- To produce sheet flooring, vinyl resin, plasticizer and additives are mixed in a vat to form what is called a plastisol. An azo compound is added to this mix. The whole mixture is then heated, causing the azo compound to decompose and form nitrogen gas bubbles. This process produces a vinyl foam that has a semiliquid consistency.
- A reverse roll coater is then used to apply this substance to a backing, which may be made of wood pulp or felt. The mixture is poured on and then smoothed out.The backing and plastisol head into an oven. The heat causes the plastisol substance to gel, the vinyl resin to absorb the plasticizer, and the resin to set.
- Next, the gel goes through a printing press where metal intaglio plates with patterns carved onto them impress the desired decorative panel into the gel.
- Another plastisol of vinyl and additives is then applied on top of the printed gel. This will form the wear layer, the transparent layer that protects the decorative pattern beneath it.
- The backing, gel, and new layer of plastisol are again sent into an oven, which is heated to a higher temperature than before. The heat causes the vinyl resin to absorb the plasticizer and melt, which creates a clear vinyl layer.
- If the flooring requires a high-gloss finish, rollers will then be used to apply a polyurethane coating. After applying a coating and ensuring consistent thickness, ultraviolet radiation lamps are used to photochemically cure the polyurethane coating. If no high-gloss coating is needed, this step is skipped, or special matting agents are used in the coating to ensure a matte finish.
- The sheet can then be rolled and cut to standard roll sizes.
If manufacturing tile flooring, some of the steps above will be different. Steps one through three are often quite similar, except for the use of plasticizer (little or none incorporated). During phase four, in which the design will be imprinted on the tiles, the plates will stamp designs that are the same as the size of the tiles.
Steps five through seven again will be quite similar. Instead of rolling the vinyl sheets, however, a die cutting machine will cut the sheet into individual tiles.
If the tiles will not have an adhesive backing, they are ready once they have cooled.
If they will have an adhesive, a roll coater will apply it to the backings of the tiles. A peelable paper cover will then be placed over the adhesive to protect it until installation.
The above process involves multiple layers of vinyl and backing. This is a common method of producing vinyl flooring, but there is also a similar method that is sometimes used that creates one homogenous piece of flooring. The design options for this type of flooring are more limited than with layered flooring, but it can be more cost-effective.
To produce a piece of homogeneous flooring, the manufacturer creates the plastisol as they would in the layered process by combining vinyl resin and additives. They then roll this mixture out into a thin layer. Applying heat and air, the plastisol dries into a durable sheet of vinyl.
If any decorative patterns are desired, the manufacturer can press them into the sheet before it finishes drying. Decorative elements and colors extend all the way through the sheet, so they will not wear away. The design needs to be one that can continue through the whole tile without compromising quality. This type of solid tile often has a satin finish and requires regular waxing or buffing to maintain a new look.
CONTACT BRENNTAG NORTH AMERICA FOR YOUR ADHESIVES
With over 10,000 products, Brenntag North America has many of the chemicals and ingredients necessary for manufacturing vinyl flooring. We have more than 190 distribution locations across the United States and Canada and offer localized services, just-in-time deliveries, technical support, formulation assistance, supply chain solutions, repackaging, and more. Our team has extensive industry knowledge and expertise.
Our coatings and construction division has a broad range of product offerings including resins, pigments, fillers, adhesives, coatings, and much more. We are safety- and environment-conscious and partnership-oriented. We want to help make sure you are ahead of the curve and have access to high-quality, safe, reliable, cost-effective product delivery.
SPEAK WITH A TEAM MEMBER
To learn more about the solutions we provide and how you can partner with us, contact our Coatings & Construction team today.
Fill out the form to begin the conversation
This document is for informational purposes only. You accept sole responsibility for reading and complying with the Safety Data Sheets (SDS’s), as well as any other safety information, relating to the products listed herein. The information contained herein is based on Brenntag’s knowledge at the time of publication or release and not on any publications, independent studies, empirical evidence or other form of verification. You should not use or rely on any statements contained herein as a basis for any representations or warranties to your customers or end users as to the safety, efficacy or suitability of any product or for purposes of ensuring your compliance with any laws or regulations. Brenntag makes no warranties, express or implied, as to the accuracy, completeness, or adequacy of the information contained herein or as to fitness of any product for any particular purpose. Nothing contained herein shall be construed as an authorization to use or an inducement to practice any patent, trade secret or other intellectual property right. Before producing and distributing any product, it is your sole responsibility to adequately test and document the performance of the product and acquire any required intellectual property rights. You assume all risks for failing to do so and Brenntag shall not be liable (regardless of fault) to you, your employees, customers or end users or any third party for direct, special or consequential damages arising out of or in connection with the furnishing or use of this information. Please contact your local Brenntag representative if you have any questions about this information.