Print & Publishing
YOU CAN RELY ON BRENNTAG, YOU CAN RELY ON US!I
If you happen to be interested in any of our products, we are pleased to serve you samples, measuring instruments and professional consulting service concerning the applications.
Also, we are ready to support you on spot with our knowledge in case you have questions or doubts while attesting our samples. We are incorporating the notion of supplier and distributor for you … Returnable packaging … Transport and logistics service all over Hungary … Downstream user and reseller network in all the regions of the country For more information, do not hesitate to contact our Product Managers or Sales Representatives!
Brenntag Hungary printing division offers almost all types of chemicals and materials commonly applied in this branch of industry.Our coordination team provides support for customers in all regions of Hungary, through our sales representatives. If you would like to order our products or contact our technologists for advice.
Thinners, cleaners and additives for:
- Ofset printing
- Pad printing
- Screen printing
is a solvent which is mostly used for ink thinning. So, for solvent flexo printing, the colors must be at viscosity of 21 sec and this value must be constantly maintained during the press using this solvent (by adding new inks ratio that is determined depending on the conditions at the facility, some paint manufacturers have set ratios in their data sheets)
Metoxypropanol and Ethoxypropanol
is added as needed in the proportion of between 5-10% to the total amount of ink in the pump. Retarder is added only if problems with the transfer of ink after the ink is diluted with a solvent. This slows the drying of ink and helps its better transfer to the substrate on which it is printed.
used mainly for cleaning the printing press, as well as hoses, pumps and other machinery parts. With this solvent the foto-polymer plates are NOT cleaned (there may be swelling; it is recommended to clean the plates with a combination of retarder and thinner in the ratio 50:50). Ethyl Acetate can be in a small percentage added to the ink if the ink dries slowly - to speed up its drying (eg, acting as an 'accelerator' for drying). For machines with automatic washing – during washing a thinner (verdunner) is used, so that in this case the use of ethyl acetate is off.
for multilayer flexible packaging - adhesives for all types of laminating from the manufacturer HB Fuller. The whole range of specific products - from single-component and two-component adhesives for laminating different types of polymer materials/substrates, the glue for PE bags (reinforcement), waxes for alucomplexes (cornet ice cream, butter foils ...), longitudinal gluing paper bags, cold seal / hot seal applications.